Brand name 3.7V polymer lithium battery 10000mAh 1162106 suitable for mobile power supply core DIY

Application scope:3.7V polymer lithium battery, with anti overcharging protective plate, recording pen, Bluetooth headset battery, Bluetooth speaker, micro equipment and other general built-in lithium ion battery.More size and capacity, welcome to consult customer service!

Keep in storage:
`Batteries should be stored in clean, dry and ventilated rooms. Avoid contact with corrosive substances and keep away from fire sources and heat sources. In general, the allowable range of storage environment temperature for no more than 3 months is -20 ~ 40 C. The allowable range of storage environment temperature for no more than 6 months is -20 to 35 C for environmental temperature, and the special product is subject to the allowable scope specified in the product specification. The best storage temperature recommended by our company is 20~25 C.
`Under normal circumstances, the relative humidity range of storage is 65 + 20%. The best storage environment recommended by our company is 50~70%.
The battery is not stored at high temperature or high humidity, otherwise it will cause leakage, rust and capacity reduction.
Long term storage may lead to reduction of battery and battery pack capacity and need.1-3Charging/The maximum discharge capacity can be achieved after the discharge cycle. After three months, the battery needs to be charged or discharged once again.If the storage period exceeds 6 months, charge discharge activation should be performed to reduce performance loss.

Warning:
It is strictly forbidden to immerse batteries in seawater or water. When stored, they should be placed in a cool and dry environment.
It is forbidden to throw batteries in a fire or heater, or to try to open it. The battery may burn or produce harmful substances.
It is strictly forbidden to use and retain batteries in the vicinity of high temperature and high temperature sources, such as fire and heater.
“It is strictly forbidden to reverse the positive and negative use of batteries.
No reverse charging is strictly prohibited. The battery must be connected accurately according to polarity and not reverse.
The use or placement of batteries at high temperatures (hot or hot cars) may cause the battery to overheat, fire or function and shorten the life.
“It is strictly prohibited to direct the battery directly into the power outlet.
`Short circuit of positive and negative electrodes of batteries directly connected with metals is strictly prohibited.
It is strictly forbidden to transport or store batteries and metals, such as hairpins, necklaces, etc.
“Strictly prohibit knocking or throwing, trampling batteries, and so on.
It is strictly prohibited to dismantle, change, directly weld batteries and puncture batteries with nails or other New tools.
It is strictly prohibited to use in areas with strong static and strong magnetic fields, otherwise it will easily damage battery safety protection devices and bring unsafe hidden dangers.
Do not solder directly to the battery.
“It is strictly forbidden to cut the outer shell and remove the coat tube of the battery.”
Batteries can not be used under extreme conditions, such as limit temperature, deep cycle, extreme overcharge and over discharge.
An abandoned battery uses insulating paper to wrap electrodes to prevent fire and explosion.
It is not allowed to mix old batteries or half of the batteries with new batteries, otherwise there will be over discharge.
Please store the battery in a cool and dry place. If a large number of batteries are stored or shipped, the battery must be discharged first.
If the battery is leaking and the electrolyte is in the eyes, please do not rub it. Rinse your eyes with water and send it to the doctor immediately, otherwise it will hurt your eyes.
If the battery gives out odor, fever, discoloration, distortion, noise, leakage or use and storage, any abnormality occurs during the charging process, and the battery is removed and discontinued from the device or charger immediately.
If the electrode is dirty, use dry cloth to wipe it before use, otherwise it may lead to poor contact function failure.

Matters needing attention:
` prior to use of batteries’According to the requirements of our technical specification documents and other documentsCharge the electricity.The charging current and voltage shall not exceed the maximum charging current and rated voltage specified in the product specification and other documents. Using current charge higher than recommended value will raise the charge discharge performance, mechanical performance and safety performance of the core, and may cause heat or leakage.
In general, the permissible range of the battery charging environment is 0~45 degrees C, the allowable range of discharge environment temperature is -10 to 60 C, and the special products are permitted under the permitted scope of the documents such as the product specification book.
`Charging the battery with the appropriate special charger.
`The discharge current should not exceed the maximum discharge current specified in the product specification. Large current discharge will lead to a New reduction in discharge core capacity and lead to overheating.
Batteries should be kept in a sealed manner. Ventilation should be provided, otherwise the battery may produce hydrogen, which will cause explosion if there is a fire source.
“Do not attempt to separate or withstand extrusion and collision of the battery group, which may cause the battery to heat and fire, and the alkaline electrolyte spilled will damage the skin and the eyes and will also corrode the clothes.
Batteries should be kept away from children. If swallowed, contact the doctor immediately.
`When the battery is not in use, it should be removed from the equipment.
When using the new battery for the first time or after long term storage, it needs to be filled with electricity before use.It should be noted that when the core is not in use for a long time, it may be in an over discharge state with its self discharge characteristics. In order to prevent overdischarge, the battery should be charged regularly.
When the battery is hot, do not touch it until it cools down.
When the battery is in use, it is necessary to turn off the device when the energy is down, so as to avoid over discharge.
When pulling out the battery pack, hold the battery terminal instead of holding the line.
If the battery is hot, if it is used, it can be cooled before ventilation.

Disclaimer
The company is not responsible for any accident caused by the use, storage and transportation of batteries beyond the documents of the product specification of the company.
The company has the right to make amendments to the product specifications and other documents provided by the company, and the company will notify the customers after the product files are amended.
We sincerely hope that users can strictly use, store and transport batteries in strict accordance with the product specifications and other attentional provisions provided by the company. Improper use, storage and transportation of batteries, such as accidents or fires, may lead to battery heating, ignition or cracking.